Manufactures
of Quality Machinery Since 1894
Ultimate Duty
Precision-Mix Batch Mixers
Ultimate Duty Mixers
Designed and built for ingredients weighting
71 to 100 pounds per cubic foot and up to 8 hours per day of operation. For 8 to 12
hours per day operation, Foot Mounted Speed Reducer, which replaces mixer's belt and first
chain drive, should be used. For 12 to 24 hours per day operation, Shaft Mounted
Speed Reducer, which replaces both of the mixer's chain drives, must be used. Shown with
protective guards removed for illustrative purposes.
Model UD-3 on Legs
18 Cubic Feet mixing capacity or 1,800 pounds
per batch. Protective guards have been removed for illustrative purposes.
Model UD-30 Round Tank Mixer on Legs
115 Cubic Feet mixing capacity or 11,500
pounds per batch. Round tank construction is available with all Davis Mixers.
U-Tank construction is standard. An additional charge is incurred for round tank
construction. Protective guards have been removed for illustrative purposes.
Model UD-40
150 Cubic Feet mixing capacity or 15,000
pounds per batch. Protective guards have been removed for illustrative purposes.
Model UD-10
60 Cubic Feet mixing capacity or 6,000 pounds
per batch. Protective guards have been removed for illustrative purposes.
For more information
please read on or see our DAVIS Ultimate Duty Specification
Sheet
- Ribbon or paddle agitators are
available for all Super and Ultimate Duty Davis Mixers.
- Carbon steel, abrasion resistant and
stainless steel construction may be selected.
|
- Mixer's outlet gate may be fitted
with; pneumatic cylinder, electrically operated actuator or Roller Gate Value.
- Stuffing Boxes may be added to
protect mixer's main bearings from abrasive or corrosive ingredients.
|
- Electronic and mechanical scales are
available for every size mixer. Calibration may be in pounds or kilograms.
- Foot mounted or shaft mounted speed
reducer may be specified to replace one or both of the mixer's chain drives.
|
Davis Ultimate Duty Batch Mixers are Built Substantially Stronger to
Accommodate Heavier Ingredients. Here's How We Do It:
Ultimate Duty
Mixers are built to mix ingredients
averaging 71 to 100 pounds per cubic foot. To accomplish this they're furnished with the
power transmission equipment normally used for the mixer three sizes larger plus the
entire tank is made of 1/4" plate steel. The same 100 cubic foot mixer that holds
7,000 pounds of 70# material would accommodate 10,000 pounds of material weighing 100# per
cubic foot. By significantly upgrading the specifications of our Ultimate Duty Mixers we
can safely increase their capacity. It's really a matter of building the machine up to the
job. Davis Mixers are designed and built to last . . . rather than just to sell.
Davis Mixers are built from the fullness of experience. We ask
no one to serve as our proving ground. Mixers have been our business since 1894.
Improvising with something less is not an economical alternative. The bitterness of poor
quality remains long after the sweetness of low price is forgotten.
Questions, Comments
about any of our products, please let us know!
"Quality is
our heritage. And our future. Good enough won't do. It must be right." . . .
H.C. Davis
|
 |
H.C. Davis Sons Manufacturing Co., Inc.
Box 395,
Bonner Springs, KS 66012-0395, U.S.A.
Telephone: 913-422-3000
Fax: 913-422-7220
Info@HCDavis.Com |
|
