Batch Mixers, Ribbon Mixers & Paddle Mixers by H.C. Davis Sons Manufacturing Co., Inc. : Krimp Mix Specifications Page

This feed plant rolls all shelled grain and mixes them with short cut hay, silage, haylage, hulls, ground ear corn, concentrates, vitamins, minerals, antibiotics, urea, and liquid molasses.

Mixing Capacity:
MODEL	10TR1010	20TR1010	30TR1010 30TR1020	40TR1020	60TR1020	80TR1020
Maximum Mixing Capacity	2,000 lb.	3,000 lb.	4,000 lb.	6,000 lb.	8,000 lb.	10,000 lb.
Tank Capacity in Cubic Feet	70	110	130	200	250	330
Cubic Feet	60	90	115	175	230	300
Cubic Meters	1.69	2.55	3.25	4.96	5.67	8.50
Bushels	48	72	92	140	160	240
Mixing Capacity in Pounds Based on ingredients Averaging:
35# per cu. ft.	2,000	3,000	4,000	6,000	8,000	10,000
30# per cu. ft.	1,800	2,7000	3,450	5,250	6,000	9,000
25# per cu. ft.	1,500	2,250	2,875	4,375	5,000	7,500
20# per cu. ft.	1,200	1,800	2,300	3,500	4,000	6,000
Capacities listed at 35 pound per cubic foot represent the maximum load each mixer is designed to process.
Length form tip of tongue to rear of mixer	14'10"	16'7"	15'6" 16'7"	20'	21'5"	22'9"
Width of discharge auger raised	7'	7'	7'8"	7'6"	10'2"	11'
Height from ground to top of discharge auger in up position, (May be lengthened for special requirements)	10'	10'	10'	10'2"	9'6"	9'3"
Height to top of Roller Mill Hopper using 20" tires	6'	6'	6' 6'6"	6'6"	6'6"	6'6"
Overall height of Roller Mill's auger (May be reduced if necessary)	11'9"	11'9"	11'9"	11'9"	11'9"	11'9"
Tractor Horse Power Required	30 HP	40 HP	50 HP	60 HP	75 HP	100 HP
Weight of Krimp and Mix	2,300#	3,300#	4,300# 4,900#	6,000#	7,000#	10,000#

Recommended P.T.O. RPM on all Krimp and Mix Mills - 540 RPM

NOTICE!! ALL ROUGHAGE MIXED IN DAVIS MIXERS MUST BE SHORT CUT!!
This means reduction to 3/4" in length or less. Davis Mixers will process short cut (to 3/4") silage, haylage, and green chop.

To Mix any other forms of roughage requires factory evaluation and approval.

Questions, Comments about any of our products, please let us know!

"Quality is our heritage. And our future. Good enough won't do. It must be right." . . . H.C. Davis

H.C. Davis Sons Manufacturing Co., Inc.
Box 395,
Bonner Springs, KS 66012-0395, U.S.A.
Telephone: 913-422-3000
Fax: 913-422-7220

Info@HCDavis.Com

Manufactures of Quality Machinery Since 1894

DAVIS Krimp and Mix Specifications

This feed plant rolls all shelled grain and mixes them with short cut hay, silage, haylage, hulls, ground ear corn, concentrates, vitamins, minerals, antibiotics, urea, and liquid molasses.