| Commercial & Industrial Mixing - Start Here

| Feed Making - Start Here

| Soil Mixing - Start Here

| Send E-mail

Manufactures of Quality Machinery Since 1894

DAVIS Scale Mounted Mixers

Assure Accuracy, Dependability and Repeatability for Your Operational "Peace of Mind."

• Electronic or Mechanical Scales are available for every mixer we offer. Scales may be calibrated in either pounds or kilograms.
• Electronic Scales are equipped with digital readouts.
• Mechanical Scales can be equipped with dial, or digital readout.
• All Scales are accurate to 1/10th of 1%, which is legal for trade.
• These mixing and weighing systems achieve consistent accuracy and efficiency. Mixing time is only 3 to 5 minutes.
• Cleanout is thorough thanks to adjustable paddles which are set to within 1/8" of the Miger's tank and may be readjusted periodically to compensate for wear.  Ribbon agitators may be ordered with an adjustable urethane sweep.  The Davis Mixer is built to start under full load.

Model S120 Davis Mixer with 7 Ton Per Batch Mixing Capacity.
Mounted on Electronic Scale

A load cell is located in each of the mixer's four corners.  A channel iron framework is provided above and below the load cells to support scale and mixer.  Mixer is shown without protective guards in place for illustration only.  Never operate any machine unless all safety shields and protective systems are in place and operational.

Davis Hopper Scale
With digital readout and ticket printer.  Scale may be suspended above mixer or provided with a self-supporting framework as pictured.

Digital Readout For Use With Electronic Or Mechanical Scales

Electronic Scales are equipped with a load cell in each of the mixer's four corners. A channel iron framework is provided above and bellow the load cells to support scale and mixer. 

Mechanical Scales are provided with a load cell attached to the transverse lever which sends information to the digital readout. 

Weight is continuously displayed in bright numerals as it increases or decreases on the scale and may be registered in either pounds or kilograms with the push of a button. Push buttons are also provided to tare or gross weight on the scale at any time. Built-in jacks allow information to be fed from indicator to a printer or computer. Information entered into the indicator, which may be fed to a printer or computer, includes: the weight of each ingredient and that of the total batch; time and date the batch was mixed; batch number; I.D. number of the operator and number of batches prepared. 

Questions, Comments about any of our products, please let us know!

H.C. Davis Sons Manufacturing Co., Inc.  Box 395, Bonner Springs, KS 66012-0395, U.S.A.  Telephone:  913-422-3000 Fax:  913-422-7220   Info@HCDavis.Com