| Commercial & Industrial Mixing - Start Here

| Feed Making - Start Here

| Soil Mixing - Start Here

| Send E-mail

Manufactures of Quality Machinery Since 1894

DAVIS Simplified Drives

STANDARD DRIVE

Standard Drive consists of V-Belt Drive from motor to Mixer's double reduction chain and sprocket drive. Belt drive operating with 1800 R.P.M. motor reduces input speed on first chain drive to only 360 R.P.M. or less depending on size of mixer. This moderate input speed is designed to minimize chain and sprocket wear in order to provide for a long period of service. Furthermore, all of the small sprockets are "hard tooth" which significantly extends their life expectancy. All bearings used on Davis Mixers are completely sealed and are provided with grease zerks. Most are ball bearings. The main drive shafts on our larger mixers operate in double row roller bearings. 

FOOT MOUNTED SPEED REDUCER

Replaces mixer's V-Belt and first chain drive. Using this system, the mixer's drive consists of an electric motor attached to the speed reducer and a single low speed chain drive from the reducer to the mixer's main shaft. This system is recommended for users that run their mixers from 8 to 12 hours per day. 

SHAFT MOUNTED SPEED REDUCER

Replaces mixer's double reduction chain drive. Reducer attaches directly to mixer's main shaft and is driven from the motor with a V-Belt drive. Mixers that are in use 12 to 24 hours per day require this system, as well as those operations that mix products which could do damage to a chain and sprocket drive.

Questions, Comments about any of our products, please let us know!

H.C. Davis Sons Manufacturing Co., Inc.  Box 395, Bonner Springs, KS 66012-0395, U.S.A.  Telephone:  913-422-3000 Fax:  913-422-7220   Info@HCDavis.Com